Without OBD II - 2.8L, 6 Cylinder

Without OBD II - 2.8L, 6 Cylinder



Diagrams By Track Number

6-Cyl MFI (Multipoint Fuel Injection) & HO2S (Heated Oxygen Sensor) - Track 68-78:

Fuse colors
30 A - green
25 A - white
20 A - yellow
20 A - blue
15 A - red
5 A - beige



Track Continuations


Previous Diagram Track 55 - 67
Next Diagram Track 79 - 90




COMPONENTS
N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve
G108 - Heated Oxygen Sensor (HO2S) 2
G39 - Heated Oxygen Sensor (HO2S) 1
S73 - Heated Oxygen Sensor (HO2S) Circuit Breaker
N71 - Idle Air Control (IAC) Valve
N156 - Intake Manifold Change-Over Valve
J192 - MFI Engine Control Module (ECM)
Z19 - Oxygen Sensor (O2S) Heater
Z28 - Oxygen Sensor (O2S) 2 Heater

GROUND CONNECTIONS

NOTE: Ground connections are indicated on the diagrams by a numeric code inside a circle.

85 - Ground connection -1-, in engine compartment wiring harness

HARNESS SPLICES

NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle.

D8O - Plus connection (87a) - for EVAP system solenoid), in engine compartment wiring harness