Inside Rear-View Mirror, Removing and Installing

Interior Rear-View Mirror

Interior Mirror With Rigid Base

Removing:






- When removing, turn mirror -1- at an angle of 60...90° (arrows -B-), until locking spring disengages and detach mirror (arrow -A-).

Installing:






- When installing, install mirror -1- at an angle of 60...90° at angle to attachment position (arrow -A-) and twist (arrows -B-), until locking spring engages.


Interior Mirror with Double Joint Base:





- On inside mirrors with double-joint base, inside mirror may not be pressed off downward.
- Inside mirror is pushed onto retaining plate, which is bonded to windshield, and secured with Allen screw.
- Loosen set screw (arrow) using 2 mm hex-wrench.
Tightening torque: 2 Nm (18 in. lb)
- Remove inside rear-view mirror upward off from mounting plate.