Camshaft Drive Belt, Assembly Overview
Toothed drive belt and pulley, assemblyCAUTION: Tighten camshaft sprockets after toothed belt tension is adjusted.
Note: Camshaft holder 3243 must be installed before attaching camshaft sprockets.
1. 70 Nm (52 ft lb)
2. Locking plate
Side with inscribed lettering faces camshaft
3. Camshaft sprocket
Removing, refer to Toothed Belt, Removing and Installing Camshaft Drive Belt, Removal and Installation
4. Toothed belt tensioner
45 Nm (33 ft lb)
5. Toothed belt
Removing and installing, refer to Toothed Belt, Removing and Installing Camshaft Drive Belt, Removal and Installation
6. Toothed belt cover
7. 10 Nm (7 ft lb)
8. 25 Nm (18 ft lb)