A - Retractor Cable Tube, Removing and Installing

- Remove sill panel trim.
- Pull up carpet in area of front seat

A - Retractor Cable Tube, Removing And Installing:

1 - Cap
2 - Tube
Removing:
- Remove cable clip -7-
- Unscrew combi self-tapping screw -8-
- Unscrew self-tapping screw -10-
- Unhook cap -1-
- Press in spring lugs (arrows)
- Pull cap -6- out of tube -2-
- Lift up spring lug with flat screwdriver
- Slide locking-cap -3- off cover -4-
- Remove nipple -5- from coupling -4-
Installing:
- Install all components in reverse order of removal

3 - Locking cap
4 - Coupling
5 - Nipple
6 - Cap
- Leads to retractor of B-pillar seat belt
7 - Cable clip
8 - Combi self-tapping screw
- 2.0 Nm (18 in lb)
9 - Spreader nut
10 - Self-tapping screw
- 2.0 Nm (18 in lb)