Vacuum Booster (pre-assembled), Installing

VACUUM BOOSTER (PRE-ASSEMBLED), INSTALLING

A - Connection to vacuum pipe
^ between middle and rear ignition coils

1 - Vacuum booster
2 - Check valve
^ Arrow must point in direction A

3 - T piece
4 - Vacuum line to brake servo unit
^ attach with bracket and clip to brake master cylinder page 24-20

5 - Crankcase breather to Air Cleaner
^ starting from the Air Cleaner side of the existing hose, make a cut at 62 mm and then at 20 mm

6 - Crankcase breather to valve cover
^ use section of existing hose

7 - Bracket
8 - 10 Nm (7 ft lb)
9 - Clip
^ to hold vacuum line in place

10 - Connection rail