Vacuum Booster A/T Only, Installing
VACUUM BOOSTER, INSTALLINGONLY for vehicles with automatic transmission
- Disconnect vacuum supply -1- (for solenoid valves) from the brake servo
- Disconnect vacuum supply -2- for the A/C and/or differential lock (if installed)
- Remove vacuum line -3-
- Remove the vacuum line between air Cleaner -A- and throttle body -B-
- Plug the open connection at air silencer -A- with cap (diameter: 2.9 mm)
- (If installed) attach the vacuum hose for the A/C and/or differential lock onto the connection at throttle body -B-
VEHICLES WITH A/C
- Attach together, rubber hose -25-, intermediate piece -22- and fabric hose -23- and connect (fabric hose to throttle body, rubber hose to A/C check valve)
VEHICLES WITH 4WD
- Route the existing vacuum line (free 0f stress) to connector on throttle body
VEHICLES WITH A/C AND 4WD
- Attach together, rubber hose -25-, T connector -24- and fabric hose -23- and connect (fabric hose to throttle body, rubber hose to A/C, differential lock to "T connector)
- If neither A/C nor differential lock is fitted, seal the connection at throttle body -B- using cap (2.9 mm diameter)