Tracks 171-183

Instument Cluster, Mini Check System Control Module - Track 171-183:

COMPONENTS
F34 = Brake Fluid Level Warning Switch
F66 = Engine Coolant Level (ECL) Warning Switch
F76 = Engine Coolant Temperature (ECT) Electronic Thermoswitch
K2 = Generator (GEN) Warning Light
J268 = Mini Check System Control Module
F1 = Oil Pressure Switch
F22 = Oil Pressure Switch (0,3 bar)
F9 = Parking Brake Warning Light Switch
K14 = Parking Brake Indicator Light
K15 = Starting Device Indicator Light

CONNECTORS
T4h = Wire Connector, 4 Point, black, in engine compartment, right
T5 = Wire Connector, 5 Point, black, connector station in auxiliary relay panel
T5c = Wire Connector, 5 Point, on instrument cluster
T5h = Wire Connector, 5 Point, red, behind instrument panel, left
T6g = Wire Connector, 6 Point, on instrument cluster
T6r = Wire Connector, 6 Point, black, behind instrument panel, left
T10 = Wire Connector, 10 Point, black, connector station in auxiliary relay panel
T10b = Wire Connector, 10 Point, brown, connector station in auxiliary relay panel
T14 = Wire Connector, 14 Point, while, on instrument cluster
T26 = Wire Connector, 26 Point, yellow, on instrument cluster

GROUND CONNECTIONS

NOTE: Ground connections are indicated on the diagram by a numeric code inside a circle.

119 = Ground connection, in headlight wiring harness
83 = Ground connection, in right front wiring harness

HARNESS SPLICES

NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle.

A45 = Wire connection (RPM signal), instrument panel wiring harness