Track 1 Thru 12

Daytime Running Lights - Track 1-12:

COMPONENTS
J189 = Auto Check System
F = Brake Light Switch
M10 = Brake Light, Right
M9 = Brake Light, Left/Coolant Fan Afterrun/Differential Lock/Boardcomputer, in Fuse Panel
G = Fuel Level Sensor
S12 = Fuse For Cruise Control/Electronic Thermoswitch/Auto Check System/Instrument Cluster/Interior Light with Delay/Back-Up Lights/Servotronic/Automatic Transmission/Airbag/Control Light
M25 = High-Mount Brake Light
J124 = Lamp Control Module, Front
M12 = Side Marker Lights, Rear
M2 = Tail Light, Right
M4 = Tail Light, Left
M6 = Turn Signal Light, Left Rear
M8 = Turn Signal Light, Right Rear

CONNECTORS
T10b = Wire Connector, 10 Point, brown, connector station in auxiliary relay panel
T26b = Wire Connector, 26 Point, white, on instrument cluster (Auto Check System With Delay)
T2an = Wire Connector, double, black, in luggage compartment
T6b = Wire Connector, 6 Point, black, in luggage compartment, left

GROUND CONNECTIONS

NOTE: Ground connections are indicated on the diagram by a numeric code inside a circle.

32 = Ground connection, behind instrument panel, left
98 = Ground connection, in rear lid wiring harness

HARNESS SPLICES

NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle.

A18 = Wire connection (54), in instrument panel wiring harness
A20 = Wire connection (15a), in instrument panel wiring harness