Tracks 76-85

Ignition Starter Switch - Track 76-85:

COMPONENTS
J273 = Fuel Gauge Damper Control Module
D = Ignition/Starter Switch
J59 = Load Reduction Relay

CONNECTORS
T10 = Wire Connector, 10 Point, black, connector station in auxiliary relay panel
T10a = Wire Connector, 10 Point, yellow, connector station in auxiliary relay panel

GROUND CONNECTIONS

NOTE: Ground connections are indicated on the diagram by a numeric code inside a circle.

199 = Ground connection, in instrument panel wiring harness

HARNESS SPLICES

NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle.

A2 = Plus connection (15), in instrument panel wiring harness
A17 = Wire connection (61), in instrument panel wiring harness
A21 = Wire connection (86s), in instrument panel wiring harness
A33 = Wire connection (75), in instrument panel wiring harness
A41 = Wire connection (50), in instrument panel wiring harness