Armrest - Removing/Installing
Group: 70Number: 94-01
Date: May 30, 1994
Subject:
Armrest, removing/installing
Model(s):
90 from 1994 m.y.
Armrest, removing/installing
Removing
Using flat screwdriver, push through hole against underside of armrest trim.
- Push back retaining tab and pry off trim (on both holes)
Note
Pry off trim starting at the front.
Installing
Install in reverse order of removing. Door trim panel, removing/installing
--> Repair Group 70
Lower armrest trim, removing/installing
Remove screws -2- (3x) from lower armrest
trim -3-
^ Tightening torque: 2.5 N-m (22 in.lb.)
Caution
Previous version arm rest trim can be installed with new version door trim panel. New version arm rest trim cannot be used with previous version door trim panels.
Using screwdriver -1-, press down on clips -2- to assure retention of side protective padding.