Data Link Connector Location
- Check convertible top control module -J256- for a blue dot placed next to the part number.
If a blue dot is present, the control module does not have On Board Diagnostic (OBD) capabilities and OBD functions cannot be carried out.
- Data Link Connectors (DLC), terminals -1- and -2- and wiring distributors -K- and -L- are located on the main fuse/relay panel in the left plenum.
Black DLC (power supply B+ and Ground)
- Terminal -1-: Ground
- Terminal -2-: B+ (terminal 30) via fuse 21 (-521-)
White DLC (data transfer)
- Terminal -1-: not used in convertible top diagnosis
- Terminal -2-: data line for "Rapid data transfer"