Tracks 52 Thru 62

ECM (Engine Control Module) - Track 52-62:

COMPONENTS

E30 = A/C Switch
F118 = A/C Refrigerant High Pressure Switch
J153 = A/C Clutch Control Module
G4 = Crankshaft Position (CKP) Sensor
G98 = EGR Temperature Sensor
G110 = Engine Coolant Temperature (ECT) Sensor, A/C
G28 = Engine Speed (RPM) Sensor
J192 = MFI Engine Control Module (ECM)

CONNECTORS

T3l = Wire Connector, 3 Point, black, on Crankshaft Position (CKP) Sensor
T3m = Wire Connector, 3 Point, gray, on Engine Speed (RPM) Sensor
T5 = Wire Connector, 5 Point, black, connector station in auxiliary relay panel
T5h = Wire Connector, 5 Point, red, behind instrument panel, left
T10 = Wire Connector, 10 Point, black, connector station in auxiliary relay panel

GROUNDS CONNECTIONS

NOTE: Grounds connections are indicated on the diagram by a numeric code inside a circle.

124 - Ground connection, in engine compartment right wiring harness

HARNESS SPLICES

NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle.

D10 - Plus connection (30), in right front wiring harness