DTC 01119

Scan Tool Printer Display, Code 01119:

NOTES:
^ If the DTC "01119" is stored and the DTC "18020/ECM Incorrect Coded" is also stored. In this case, the DTC "18020" should be handled first during the repair.
^ The "Incorrect signal" malfunction is stored as soon as the ECM is coded for automatic transmission, 1 second has elapsed after engine start, vehicle speed is less than 7 mph, and the signal for transmission range selection is "high" during the entire time.
^ The "Signal to Ground" malfunction is stored as soon as the ECM is coded for automatic transmission, the Closed Throttle Position (CTP) switch is open, engine speed is greater than 2000 RPM, the load is greater than 64%, the signal for transmission range is "low" and these conditions are present for longer than 5 seconds.