P0302

VAG 1551 Scan Tool Printout:

DTC's P0300/16684, P0301/16685, P0302/16686 and P0303/16687

Notes:
^ DTC P0300/16684 is set as soon as combustion firing is recognized in more than one cylinder.

^ If there is combustion misfire with low misfire rate, the Malfunction Indicator Lamp (MIL) is only switched ON after two drives, one after another (without a preceding cold start) and this recurring malfunction.

^ If MIL starts to flash while driving, combustion misfire with high misfire rate has been identified. If this occurs, advise customer to drive only at a reduced speed and do not subject engine to heavy loads (i.e. rapid acceleration). Check DTC memory and repair malfunction as soon as possible, since three way catalytic converter could be damaged.