Mileage Display, Setting

WARNING!
- This setting is only possible with a new cluster
- This setting is possible only one time for each instrument cluster.
- Only a larger setting value can be entered.
- If the wrong information has been entered and con firmed; correction is not possible. The instrument cluster must be replaced.


NOTE: Setting of service interval display must be done in kilometers. Therefore calculate the value from miles to km. Multiply miles by 1.6 to convert to km.


- Press buttons -1- and -1- "Login-Procedure" function 11.

Indicated on display

Rapid data transfer Q
11- Login-Procedure

- Press -Q- button to confirm input.

Indicated on display

Login procedure
Enter code number XXXXX

- Input code number 13861.
- Press -Q- button to confirm input.


Indicated on display

Rapid data transfer HELP
Select function XXXXX

- Press buttons -1- and -0- to select "Adaptation" function 10.

Indicated on display

Rapid data transfer Q
10 - Adaptation

- Press -Q- button to confirm input.

Indicated on display

Channel number entered XX

- Press button -0- and -9- to select channel 9.
- Press -Q- button to confirm input.

Indicated on display

Channel 9 Adaptation 2 ->
<- 1 3 ->

- Advance through program sequence with -> button.

Indicated on display

Channel 9 Adaptation 2 Q
XXXXX

- Enter adaptation value.

Example: Kilometer status = 89627; adaptation value = 08963

- Round ones value up to the next tens and drop ones place (627 becomes 630; drop zero).
- Add zero in hundred-thousands place.
Ones: round to the next tens

X Hundred thousands: 100000 - 900000 km
X Ten thousands: 10000 - 90000 km
X Thousands: 1000 - 9000 km
X Hundreds: 100 - 900 km
X Tens: 10 - 90 km

- Press -0- button to confirm input.

Indicated on display

Channel 9 Adaptation 2 Q
<-1 3 ->

- Press -Q- button to confirm input.

Indicated on display

Channel 9 Adaptation 2 Q
Store revised value?

- Press -Q- button to confirm input.

Indicated on display

Channel 9 Adaptation 2
Changed values stored

- Press H button to end coding.

Indicated on display

Rapid data transfer HELP
Select function XX

- Press button -0- and -6- "End Output" function 06. Indicated on display

Rapid Data Transfer Q
06 - End Output

- Press -Q- button to confirm input.