Setting of Service - Interval 1-Resetting (Distance/Time)

Resetting (Distance)

Note:
Setting of service interval display must be done in kilometers. Therefore calculate the value from miles to Kilometers

1. Push button 0 and 6.
2. Confirm input with Q-button.
Display shows: See box 1 in above image.
3. Continue advancing through program sequence with the -> button.
Display shows: See box 2 in above image.
4. Enter value between 0 km (00000) and 30000 km (00030). The value can be entered in steps of 1000 km.
Example: 15000 mi/24000 km, therefore enter 00024.
5. Confirm input with Q-button
Display shows: See box 3 in above image.
6. Confirm input with Q-button
Display shows: See box 4 in above image.





7. Confirm input with Q-button
Display shows: See box 1 in above image.
8. End coding with -> button
Display shows: See box 2 in above image.
9. Push button 1 and 0
Display shows: See box 3 in above image.
10. Confirm input with Q-button

Resetting (Time)
^ Begin Setting instrument cluster -> See Quick Reference SRI Setting Table.

1. Push button 0 and 7.
2. Confirm input with Q-button
Display shows: See box 4 in above image.





3. Advance through program sequence with -> button
Display shows: See box 1 in above image.
4. Enter Adaptation value between 0 days (00000) and 360 days (00036). The value can be entered in steps of 10 days.
Example: 360 days, therefore enter 00036.

Note:
Refer to inspection table

5. Confirm input with Q-button.
Display shows: See box 2 in above image.
6. Confirm input with Q-button.
Display shows: See box 3 in above image.
7. Confirm input with Q-button.
Display shows: See box 4 in above image.
8. End coding with -> button.
Display shows: See box 5 in above image.
9. Push button 1 and 0
Display shows: See box 6 in above image.
10. Confirm input with Q-button