Instrument Cluster, Setting

Note:
Instrument cluster must be coded before setting if it was replaced

1. Select rapid data transfer
Display shows: See box 1 above image.

2. Push button 1 and 7.
Display shows: See box 2 above image.

3. Confirm input with Q-button
Display shows: See box 3 above image.

After 5 seconds the display shows a part number and the control module code: See box 4 above image.

4. Push button 1 and 7.
Display shows: See box 5 above image

5. Push button 1 and 0
Display shows: See box 6 above image.

6. Confirm input with Q-button