Symptom Related Diagnostic Procedures

The antenna is directly connected to the control module. If the antenna becomes inoperative, control module -J276- must be replaced.

If the remote control system does not operate properly,troubleshoot the system using the following steps:
- Test system using all transmitters. Component Tests and General Diagnostics
The system is OK if the basic function, safety function and locking deactivation work with all transmitters.

If one transmitter does not function:
- Replace battery in malfunctioning transmitter. Component Tests and General Diagnostics
- Test system functions.Component Tests and General Diagnostics

If transmitter still does not function:
- Replace inoperative transmitter.
- Code all transmitters. Service and Repair

If all transmitters are inoperative, troubleshoot using the following steps:
- Replace battery in inoperative transmitter. Component Tests and General Diagnostics
- Test system functions. Component Tests and General Diagnostics

If system still does not function:
- Replace inoperative transmitters.
- Code all transmitters. Service and Repair

If system still does not function:
- Replace remote control module.
- Code all transmitters. Service and Repair
- Test system functions. Component Tests and General Diagnostics

If system still does not function:
- Check wiring system using current wiring diagram.
- If necessary, replace wiring harness.
- Test system functions. Component Tests and General Diagnostics