Engine Coolant Temperature (ECT) Gauge, Removing and Installing

Engine Coolant Temperature (ECT) gauge, removing and installing (VDO)

- Remove instrument cluster. Service and Repair




- Remove hex nuts -4- with washers and remove instrument panel light dimmer switch -3-.
- Remove screws -1- and remove Mini-Check system display unit -2-.




- Remove screws -1- and nuts -2-.

CAUTION! The printed circuit is fragile. Use extreme care in removing, installing or handling, or damage to the circuits will result.

- Release latch -3- and carefully remove printed circuit -4-.
- Remove speedometer mounting plate from front frame.




- Release Engine Coolant Temperature (ECT) gauge latches (arrows) and remove temperature gauge -A- from mounting plate.
- Install in reverse order of removal.