Operation CHARM: Car repair manuals for everyone.

Tracks 334 Thru 347

ABS Control Module - Track 334-347:






COMPONENTS


J104 - ABS Control Module
N55 - ABS Hydraulic Unit
N137 - ABS Inlet, Outlet Valve, Left Front
N138 - ABS Inlet, Outlet Valve, Right Front
N139 - ABS Inlet, Outlet Valve, Left Rear
N140 - ABS Inlet, Outlet Valve, Right Rear
J105 - ABS Return Flow Pump Relay
V39 - ABS Return Flow Pump
J106 - ABS Solenoid Valve Relay
G44 - ABS Wheel Speed Sensor, Right Rear
G45 - ABS Wheel Speed Sensor, Right Front
G46 - ABS Wheel Speed Sensor, Left Rear
G47 - ABS Wheel Speed Sensor, Left Front
S31 - Fuse For ABS, Differential Lock, in Fuse Panel

CONNECTORS

T2a - Wire Connector, double, below rear seat, right
T2b - Wire Connector, double, in engine compartment, right
T2c - Wire Connector, double, below rear seat, left
T2d - Wire Connector, double, in engine compartment, left
T10d - Wire Connector, 10 Point, blue, connector station in auxiliary relay panel

GROUNDS CONNECTIONS

NOTE: Grounds connections are indicated on the diagram by a numeric code inside a circle.

22 - Ground connection, on hydraulic unit
100 - Ground connection -1-, in ABS wiring harness

HARNESS SPLICES

NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle.

J1 - Plus connection (30), in ABS wiring harness