Erase DTC Memory (Function 05)

NOTE: If DTC memory cannot be erased, check DTC memory again and repair malfunctions.


Requirements
- DTC memory checked
- All malfunctions repaired

After successfully checking DTC memory:

Carrying out "Erase DTC Memory" function 05

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display


Rapid data transfer Q
05 - Erase DTC Memory


- Press -Q- button to confirm input.

Indicated on display


Rapid data transfer ->
DTC memory is erased!


DTC memory is now erased.
- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


NOTES:
- This message indicates an error in the test sequence.


Attention! ->
DTC Memory was not interrogated


- This message indicates an error in the test sequence.


Rapid data transfer ->
DTC Memory was not interrogated


Adhere exactly to the test sequence: first check DTC memory and, if necessary repair malfunctions, then erase DTC memory.