Function Selector Switch -E272- (In Center Console)

Function Selector Switch II -E272- (in center console), Removing And Installing

Removing
The function selector switch -1- is located in the center console next to the parking brake lever.







NOTE: The function selector switch must only be removed from panel straight upward. Do not tilt or turn the switch during removal otherwise the catches on bottom side may break Off.


- With two screw drivers, carefully pry open cover (arrows) and remove function selector switch -1- from panel straight upward.
- Disconnect 4-pin harness connector at function selector switch.

Installing
- Install in reverse order of removal.