Instrument Panel, Removing and Installing

Instrument Panel, Removing And Installing







1 - Instrument panel
Removing:
- Remove driver-side knee bolster.
- Remove passenger-side knee bolster.
- Remove rear center console.
- Remove front center console.
- Remove instrument panel center piece.
- Remove driver-side airbag unit.
- Remove steering wheel.
- Remove passenger-side airbag unit.
- Remove steering column cover.
- Remove bolts - 2 -, - 3 -, - 5 -, - 6 -, and - 7 -.
- To remove, pull instrument panel out of brackets - 4 -.

NOTE: Always replace instrument panel after passenger airbag has deployed.







Installing:
- Installation is the reverse of removal
Adjusting:
- Instrument panel must be centered in vehicle
2 - Bolt
- 5 Nm (44 ft.lb)
3 - Bolts (3x)
- 5 Nm (44 ft.lb)
4 - Brackets (2x)
- With felt base
5 - Bolts (2x)
- 5 Nm (44 ft.lb)
6 - Bolts (2x)
- Remove bolts on left and right-side of instrument panel.
- 5 Nm (44 ft.lb)
7 - Bolts (2x)
- 5 Nm (44 ft.lb)