Exhaust System: Specifications

TIGHTENING SPECIFICATIONS





LEGEND
1 Exhaust Manifold
2 Gasket
3 Hex Nut
4 Heated Oxygen Sensor (H02S)
5 Three Way Catalytic Converter (TWC) With Insulating Element, Left
6 TWC With Insulating Element, Right
7 Clip
8 Hex Bolt
9 Rear Muffler
10 Retaining Ring
11 Retaining Ring
12 Center Muffler

Hex Nut (3)
- Tighten to: 30 Nm (22 ft. lbs.).

Heated Oxygen Sensor (4)
- Tighten to: 50 Nm (37 ft. lbs.).
- Lubricate Threads With G5 anti seize lubricant, or equivalent.
- Anti seize lubricant must not get into slots on HO2S probe body.

Clip (7)
- Tighten to: 40 Nm (30 ft. lbs.).

Hex Bolt (8)
- Tighten to: 40 Nm (30 Ft. Lbs.)..