C - Three-Point Rear Shoulder Belt, Removing and Installing

- Remove rear seat cushion/backrest and rear filler panel.

C - Three-Point Rear Shoulder Belt, Removing and Installing:

1 - Belt guide cover
- Large symbol must always point toward center of vehicle
2 - Webbing guide cover
- Pry off with flat screwdriver
3 - Webbing guide
- To remove, press in retaining lug -4- with flat screwdriver, pry off webbing guide upward
4 - Retaining tab
- Must engage completely
5 - Rear filler panel
6 - Three-point seat belt
Removing:
- Release webbing end from floor group
- Lever off covers -1- and -2-
- Unscrew bolt -7-
- Pull webbing through webbing guide
Installing:
- Install in reverse order of removal
7 - Bolt
- Unscrew in trunk
- 50 Nm (37 ft lb)