Tracks 263-274

Diagrams By Track Number

Heated Rear Window, Servotronic - Track 263-274:

Fuse colors
30 A - green
25 A - white
20 A - yellow
20 A - blue
15 A - red
5 A - beige



Track Continuations


Previous Diagram Tracks 252-262
Next Diagram Tracks 275-285

To Refer to
124 Tracks 120-129 Tracks 120-129
143 Tracks 138-147 Tracks 138-147
158 Tracks 148-158 Tracks 148-158
182 Tracks 173-186 Tracks 173-186
223 Tracks 214-224 Tracks 214-224
288 Tracks 286-296 Tracks 286-296
296 Tracks 286-296 Tracks 286-296




COMPONENTS

E87 - A/C Control Head
L19 - Automatic Transmission Console Light
J213 - Cruise Control, Control Module
Z4 - Driver's Side Heated Mirror
G183 - Glass breakage sensor, rear left side window
G106 - Outside Air Temperature Display
G17 - Outside Air Temperature Sensor
Z5 - Passenger's Side Heated Mirror
R - Radio
E15 - Rear Window Defogger Switch
E18 - Rear Fog Light Switch
J133 - Rear Window Defogger Delay Relay
Z1 - Rear Window Defogger, Heat Element
J235 - Servotronic Control Module
N119 - Servotronic Solenoid Valve


CONNECTORS

T4a - 4-Pin Connector, black, test connection, near J 213
T5 - 5-Pin Connector, yellow, on instrument cluster
T6c - 6-Pin Connector, green, connector station 2
T6g - 6-Pin Connector, blue, connector station 2
T6o - 6-Pin Connector, brown, connector station 1
T6q - 6-Pin Connector, red, connector station 3
T6u - 6-Pin Connector, yellow, connector station 3
T6w - 6-Pin Connector, orange, connector station 1
T6z - 6-Pin Connector, dark brown, connector station 1
T6ab - 6-Pin Connector, yellow, connector station 1
T6ac - 6-Pin Connector, blue, connector station 1
T6bi - 6-Pin Connector, blue, connector station 3


GROUND CONNECTIONS

NOTE: Grounds connections are indicated on the diagram by a numeric code inside a circle.


75 - Ground connection, on right rear pillar
81 - Ground connection -1-, in instrument panel wiring harness
135 - Ground connection -2-, in instrument panel wiring harness


HARNESS SPLICES

NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle


A19 - Wire connection (58d), in instrument panel wiring harness
A27 - Wire Connection (vehicle speed signal), in instrument panel wiring harness