Replacing

General notes
- Before removing instrument cluster, note vehicle mileage
- After replacing the instrument cluster, the vehicle mileage and all SRI indicators are to be re-established/coded into the new cluster.
- Note the Airbag safety information, where applicable.
- Functional tests of the instruments should be conducted.
- See applicable wiring diagram for routing of terminals and checking multi-pin connectors.

Test requirements
- Fuses OK, check according to wiring diagram.
- Always check the coding of the instrument cluster with VAG 1551 scan tool.


NOTE: "Automatic Test Sequence" function 10 is not possible with VAG 1551 scan tool with software status 4.0 (version 4.0 card). The control modules should be checked individually using their respective address words. With the update of test software this function will be possible.


Quick referance SRI setting table




- Record vehicle milage in kilometers. Multiply miles by 1.6 to convert to km.