Check DTC Memory (Function 02)

NOTE: The malfunction information displayed is not updated continuously, only when the On Board Diagnostic (OBD) program is initiated or with "Erase DTC memory" function 05.


- Switch printer on by pressing PRINT button (indicator light in button comes on.)

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0-and -2 to select "Check DTC Memory" function 02.

Indicated on display

Rapid data transfer Q
02 Check DTC memory

- Press -Q- button to confirm input.

Indicated on display (no DTCs stored)

No DTC recognized ->

or

Indicated on display (number of DTCs stored)

X DTC recognized ->


NOTES:
- Stored DTCs are displayed and printed out in sequence.
- With the printer switched off, press the -> button to advance through the program sequence.


- Repair malfunctions per Diagnostic Trouble Code table. Power Locks

Indicated on display

Rapid data transfer HELP
Select function XX

If something else is indicated on the display:
See Operating instructions for scan tool.

- Press buttons -0- and -6- to select "End Output" function 06. End Output (Function 06)
- Switch ignition off and disconnect scan tool from Data Link Connector (DLC).