Display Group 011
Notes on display field 1:
- At idle-Closed Throttle Position (CTP) switch closed-an ignition timing point of 12° BTDC is displayed.
- When the engine speed is increased -CTP switch open- the current ignition timing point is displayed without knock control and without digital idle speed control.
Notes on display field 2:
- Digital idle speed control is only active with Closed Throttle Position (CTP) switch closed.
- Knock control is active starting at an engine load greater than 40% Display group 013 and/or 014.
Notes on display field 3:
- Digital idle speed control (ISC) is only active with the Closed Throttle Position (CTP) switch closed.
- Ignition timing point access to digital ISC with open CTP switch: 0.0° crankshaft.
- During "Basic Setting" function 04, digital ISC is blocked, display shows 0.0° crankshaft.
- Ignition timing point access to DLS during "Read Measuring Value Block" function 08 at idle without electrical consumers: 0.0 +/- 3.0 crankshaft.