Convertible Top Front Lock Switches

Replacing convertible top front lock switches -F205-, -F172- and solenoid -N187-
- When installing hydraulic cylinder switch connectors, make sure switch connector grommet -1- fits properly over O-ring -2-.





The convertible top latch open position switch -F205- is located in the left roof frame and is not available separately.
- Replace left roof frame trim if switch is malfunctioning.

The convertible top front lock switch -F172- and the convertible top unlocking solenoid -N187- are located in the left roof frame and are not available separately.
- Replace the left roof frame trim if switch and/or solenoid is malfunctioning.