Tailgate Lock

Tailgate Lock, Removing And Installing







1 - Rear lid lock actuator
- Before removing, first disengage operating rod - 2 - from rear lid lock Fig. 6.
- Disconnect electrical harness connector.
- Remove Torx bolts - 8 -.
2 - Operating rod
- Disengage and engage in rear lid lock Fig. 6.
3 - Tailgate lock

Removing:
- Disengage operating rod - 2 - and connecting rode - 5 - from rear lid lock.
- Disconnect electrical harness connector.
- Remove hex nuts - 4 - and take out rear lid lock.







4 - Hex nut
- 8 Nm
5 - Operating rod
- Unclip and clip in rear lid lock Fig. 6.
6 - Hex nut
- 8 Nm
7 - Lock mechanism
8 - Torx screw
- 2.5 Nm







Fig. 6 Disengaging and engaging operating and connecting rods
- Swing hinge arm - 6 - in direction of arrow - A - and pull out connecting rod - 4 -.
- Swing hinge arm - 3 - in direction of arrow - B - and pull out connecting rod - 5 -.
- To remove rear lid lock - 1 - remove hex bolts - 2 -.