Active Check Module: Service and Repair
Adaptation (Scan Tool Function 10)
Function 10 is used to initiate and store the following changes:
- Adaptation of fuel gauge display
- Correction of the fuel consumption display
- Coding of language versions for Auto Check system
- Adaptation of the Service Reminder Indicator (SRI)
- Setting the odometer after instrument cluster replacement.
Individual functions are called up by entering the appropriate adaptation channel number (See adaptation table).
Adaptation table
Adaptation channel Adaptation function
01 Adaptation of fuel gauge display
02 Resetting SRI after service
03 Adaptation of fuel consumption display
04 Language versions of the multi-function display
05 SRI - service interval for oil change (distance in km)
06 SRI - service interval 1 (IN1) distance in km
07 SRI - service interval 1 (IN1) time in days
08 SRI - service interval 2 (IN2) time in days
09 Adapting odometer reading
Initiating "Adaptation" function 10
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10.
Read Measuring Value Block Q
10 - Adaptation
Indicated on display
- Press -Q- button to confirm input.
Indicated on display
Adaptation Q
Insert channel number XX
- Insert desired adaptation channel (See Adaptation table).
- Press -Q- button to confirm input.
NOTE: After changing an adaptation value or after an adaptation in a specific channel has been completed, Adaptation" function 10 must be selected again in order to select another adaptation channel.
Adapting multi-function display language versions
NOTE: Adaptation is only carded out on vehicles equipped with on board computer.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10 and press -Q- button to confirm input.
Indicated on display
Adaptation Q
Insert channel number XX
- Press buttons -0- and -4-.
- Press -Q- button to confirm input
Indicated on display
Channel 4 Adaptation 1 ->
< -1 3- >
NOTE:
- The display shows only the last digit of the five-digit language code, e.g. 1 for German.
- Input of incorrect values will end the adaptation function. 'Adaptation" function 10 must be selected again.
- When using the VAG1551 keypad, only the direct input method can be used.
Language version coding table
Code Language
00001 German
00002 English
00003 French
00004 Italian
00005 Spanish
00006 Portuguese
Step-by-step method:
- Press button -1- to move downward and button -3- to move upward through codes. Example: 2 for English.
Indicated on display
Channel 4 Adaptation 2 Q
< -1 3- >
- Press -Q- button to confirm input.
Indicated on display
Channel 4 Adaptation 2 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display
Channel 4 Adaptation 2 ->
Changed value is stored
- Press -> button to end language version adaptation.
Direct input method:
Indicated on display
Channel 4 Adaptation 1 ->
< -1 3- >
- Press -> button.
Indicated on display
Channel 4 Adaptation 1 Q
Input adaptation value XXXXX
- Input desired 5-digit code using keypad.
Example:
Code: 2 (English)
Input value: 00002
- Press -Q- button to confirm input.
Indicated on display
Channel 4 Adaptation 1 Q
Input adaptation value 00002
- Press -Q- button to confirm input.
Indicated on display
Channel 4 Adaptation 2 Q
< -1 3- >
- Press -Q- button to confirm input.
Indicated on display
Channel 4 Adaptation 2 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display
Channel 4 Adaptation 2 ->
Changed value is stored
- Press -> button to end language version adaptation.