Output Diagnostic Test Mode (DTM) (Function 03)

Output Diagnostic Test Mode (Scan Tool Function 03)

The Output Diagnostic Test Mode is used to check operation of the crash response system. When airbags are triggered, the central locking system unlocks the doors and simultaneously blocks internal switches. Emergency flashers and interior lights are switched on.


NOTE: Before initiating the Output Diagnostic Test Mode, switch central locking system to "closed" by operating internal switch.


Carrying out "Output Diagnostic Test Mode" function 03

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -3- to select "Output Diagnostic Test Mode" function 03.

Indicated on display


Rapid data transfer Q
03-Output Diagnostic Test Mode


- Press -Q- button to confirm input.

Indicated on display


Output Diagnostic Test Mode ->
Signal: Open central locking system


The central locking system must switch to "open."
Emergency flashers and interior lights switch on.

- Operate internal switch.
Central locking must switch back to "closed."

Indicated on display


Output Diagnostic Test Mode ->
END


- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX