Steering Gear

1 Bolts + Washers
- Tighten to: 65 Nm (48 ft. lbs.)
- Follow tightening sequence and positioning, refer to Power Steering Line/Hose.

2 Boot Seal

3 Eccentric Screw
- Torx T50

4 Steering Column

5 Self-Locking Nut
- Always replace
- Tighten to: 40 Nm (30 ft. lbs.)

6 Bolt + Washer
- Tighten to: 7 Nm (62 inch lbs.)
- For adjusting toe-in curve. Service and Repair
7 Bolt

8 Self-Locking Nut
- Always replace
- Tighten to: 45 Nm (33 ft. lbs.)

9 Return Hose
- Installation position, refer to Power Steering Line/Hose.

10 Flexible Hose
- Installation position, refer to Power Steering Line/Hose.

11 Screw Plug For Steering Gear Centering
- Tighten to: 18 Nm (13 ft. lbs.)

12 Power Steering Gear With Tie Rods
- Removing servicing and installing. Service and Repair

13 Banjo bolt
- Tighten to: 40 Nm (30 ft. lbs.)
- With integrated check valve

14 Seal
- 14 x 20 mm
- Always replace

15 Banjo bolt
- Tighten to: 50 Nm (37 ft. lbs.)

16 Seal
- 16 x 22 mm
- Always replace

17 Hex bolt
- Tighten to: 35 Nm (26 ft. lbs.)

18 Steering Damper

19 Bushing

20 Rubber Shock Absorber
- Two-piece

21 Hex Nut
- Tighten to: 10 Nm (7 ft. lbs.)
- Counter-hold at hex of piston rod/steering damper for loosening and tightening