Clutch Switch: Service and Repair

Note:
The clutch pedal position switch -F194- allows the engine to be started only with the clutch pedal depressed.





1- Mounting bracket
- Before removing, remove steering column from steering gear, refer to Steering and Suspension; Steering; Steering Column.
2- Cable bracket
3- Locking clip
4- Pin and locking plate
- Latched in clutch pedal
5- Clutch pedal
- Removing and installing; refer to Transmission and Drivetrain; Clutch; Clutch Pedal Assembly.
6- Clip
7- Bracket for harness connector
8- Clutch Pedal Position (CPP) switch -F194
- Adjusting
9- Clip
10- Screw and washer assembly
- 8 Nm (71 inch lb)
11- Mounting plate