Left and Right-Side Trim, Removing and Installing

Foldable rear backrest
- Remove side cover.

Split foldable rear seat, removing and installing.
- Remove on-board tool kit and jack.







- Remove cover -1- for latch bracket and remove trim -2-.
- Remove plastic clips -5- (2x) at tail light.
- Remove screws -3- for loading edge cover -4-.
- Tightening torque: 1.5 Nm (13 in. lb)
- Unclip clip -6- at left side reinforcement.
- Raise loading edge trim -4- slightly and pull out trim -2-.
- Tilt trim toward center of vehicle and remove.