Side Airbag Harness Connector, Disconnecting

WARNING!
Before starting work on seats, connect VAS5094 airbag adapter. Electrical / Mechanical Repair


NOTE: Technician must be grounded before disconnecting ignition and Ground (GND) wiring; to ensure proper grounding, touch door striker or body


- Grab side airbag harness connector -1- from behind
- Pull catch -3- with one finger in direction of arrow (toward hand).
- At same time, use same hand to pull side airbag connector -1 - forward (in direction of arrow).







- Using screwdriver -1-, push tab -2- over catch -3- and disconnect harness connector -4-.