Steering

Power Steering Hydraulic Circuit (6 CYL. 2V Engine), Overview





1. Power steering gear
2. Flexible hose
3. Return hose
4. Cap with dipstick
5. Strainer for expansion tank
- Integrated into reservoir
6. Bolt
- 9 Nm (80 inch lbs.)
7. Expansion - tank
- Refill with hydraulic fluid, Part No. G 002 000
- Capacity: 0.7 liters (12 oz.)
8. Rubber mount
9. Clamp
- Always replace
- Use VAG1275 to tighten
10. Return hose
- Between expansion tank and oil cooler
11. Clamps
- Always replace
- Use VAG12751 to tighten
12. Bolt - w/washer assembly
- 10 Nm (7 ft. lbs.)
13. Cooling line
14. Cable strap
15. Clamp
- Always replace
- Use VAG1275 to tighten
16. Suction hose
17. Bolt - w/washer assembly
- 8 Nm (71 inch lbs.)
18. Bracket
- Bolted to cylinder head
19. Clamp
- Always replace
- Use VAG1275 to tighten
20. Hose fitting
- 50 Nm (37 ft. lbs.)
21. Seal 18 x 24
- Always replace
22. Seal 16 x 22
- Always replace
23. Power steering pump
- Fill with fluid before installing.
24. Banjo bolt
- 50 Nm (37 ft. lbs.)
25. Supply line
- 40 Nm (30 ft. lbs.)
- Counterhold at hex on flexible hose when tightening fitting
- Mounted to intake manifold with bolt -26-
26. Bolt
- 8 Nm (71 inch lbs.)
27. Clip
28. Nut
- 20 Nm (15 ft. lbs.)
29. Washer
30. Coolant line