Engine Lubrication: Service and Repair

NOTE:
^ The oil retention valves must be replaced if the valve train sounds noisy on short drives, although the noise may go away on longer drives.
^ When installing the oil pump, ensure that the driver at the crankshaft engages in the oil pump,

1. Remove intake manifold.
2. Remove cover plate beneath intake manifold.





3. Replace oil retention valves (arrows).
4. Tighten as follows:
Intake manifold: 20 Nm (15 ft. lbs.).
Cover: 10 Nm (7 ft. lbs.).
Oil retention valves: 25 Nm (18 ft. lbs.).