Programming and Relearning

Code Control Module (function 07)

A/C control head -E87- coding, vehicles 1996
A/C control head -E87- coding shows market application, compressor type and engine type.


NOTE:
- Zexel A/C compressors are installed from start of production. During m.y. 1996, Nippondenso type compressors are installed as a running change. These compressors are not equipped with A/C speed sensor G111.
- Each time A/C control head -E87- is coded, basic setting must be performed. Basic Setting (Function 04)
- If a the display of a newly installed A/C control head -E87- flashes after switching ignition on (for approximately 2 minutes), code the control head and execute basic setting.


- Connect Scan Tool VAG1551 or 1552 in operating mode -1-, enter address word 08 "A/C Heating Electronics" and move forward in program until "select function XX" appears in the display.
- Switch on printer by pressing the PRINT button (indicator lamp in button comes on).

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -7-.

Indicated on display


Rapid data transfer Q
07 - code control Module


- Press -Q- button to confirm input.

Indicated on display


Code control Module
Enter code number XXXXX


- Press -> button.

Coding m.y. 1996: