Flywheel/Pressure Plate Torque & Tightening Sequence

Flywheel/Pressure Plate Torque & Tightening Sequence






2. Flywheel Bolt
- Always replace
- With dual-mass flywheel 60 Nm (44 ft. lbs.) + 1/2 turn (180°)
- Without dual-mass flywheel 60 Nm (44 ft. lbs.) + 1/4 turn (90°)

5. Pressure Plate Bolt 25 Nm (18 ft. lbs.)
- Loosen and tighten in stages and in diagonal sequence