Position of Shims

Note: List of adjustments when replacing individual components of final drive, Refer to List of Adjustments.

S1 Shim for ring gear in final drive cover
S2 Shim for ring gear in final drive housing
S3 Shim for pinion shaft in final drive housing

Special tools and equipment
- VW382/10 extension pin
- VW385/1 universal mandrel
- VW385/2 centering disc
- VW385/3 centering disc
- VW385/14 measuring rod
- VW385/15 extension pin
- VW385/17 measuring plate
- VW385/30 master gauge-adjustable
- VW385/33 end dimension plate
- VW387 dial indicator holder
- VW388 measuring lever
- VW401 thrust plate
- VW402 thrust plate
- VW408A punch
- VW457 support channels
- VW521/4 adjustment for ring gear
- VW521 /8 adjustment for ring gear
- VW540 engine and transmission support
- 30-205 thrust pad
- 2003/3 mounting ring
- 2052/2 assembly tool for pinion shaft
- 3005 thrust pad
- 3028 retainer
- 3062 thrust pad
- 3253 wheel bearing assembly set with 3253/3 and 3253/4
- 3304 bracket
- VAG1383A engine/transmission
- VAG1359/2 universal mount
- Dial indicator extension 30 mm
- Dial indicator
- Torque gauge 0 - 600 Nm (53 inch lbs.)