Reverse Idler Gear, Removing and Installing

1. Circlip
2. Washer
3. Reverse idler gear
- Different versions, allocation, See Fig. 24, Refer to Drive Pinion and Hollow shaft, disassembling and assembling.
4. Needle bearings for reverse idler gear
5. Thrust washer
6. Transmission - cover
- With reverse idler gear shaft (arrow)
- To remove reverse idler gear it is not necessary to remove reverse idler gear shaft.
- Reverse idler gear shaft is not available as replacement part
7. Torx bolt
- 35 Nm (26 ft. lbs.)
- Serves as additional method of securing reverse idler gear shaft