Technician Safety Information

SAFETY PRECAUTIONS
Be sure the ignition is switched OFF, when:
- Disconnecting ignition wires
- Disconnecting fuel injection system wiring
- Connecting or disconnecting test equipment leads
- Disconnecting the battery
- Washing the engine or engine compartment

RULES OF CLEANLINESS
Whenever carrying out work on the fuel supply and fuel injection systems, carefully observe the following five rules of cleanliness
1. Thoroughly clean fuel system line and hose connections and the surrounding area before disconnecting.
2. Place removed components on a clean surface and cover. Use plastic sheeting or paper. Do not use fluffy rags that could leave lint!
3. Carefully cover over or seal any components that have been opened if repairs are not carried out immediately.
4. Install only clean parts:
Do not remove replacement parts from the packaging until immediately before they are to be installed.
Do not use parts that have been stored without packaging (e.g. in toolboxes, etc.).
5. When the fuel system is opened:
Avoid working with compressed air whenever possible.
Avoid moving the vehicle if possible.