Steel Disc Wheel

1 Tire
- To ensure driving safety, replace tires on front or rear axle in pairs, not individually
- The tires with the deeper tread depth should always be on the front wheels
- Use only tires from the same manufacturer, of the same type of construction and tread type

2 Valve
- Replace when replacing the tire or the wheel

3 Steel disc wheel
- 6J x 15, ET 45 mm

4 Wheel bolt
- Tighten to: 110 Nm (81 ft. lbs.)
- 14 x 1.5 x 27.5 mm

5 Lock cylinder
- Install on wheel bolt and lock

6 Cap
- Install on lock cylinder

7 Wheel cover
- Installing: place wheel cover with large opening (marked on the back with a tire valve symbol) over the valve and then press onto wheel until seated

8 Holding spring for balance weights

9 Balance weights
- Maximum 60 grams (2 oz.) per rim permissible