Tightening

TIGHTENING SPECIFICATIONS
Crossmember -I- To Body 45 Nm (33 ft lb)
Crossmember -I- To Crossmember -II- 45 Nm (33 ft lb)
Crossmember -II- To Final Drive 45 Nm (33 ft lb)
Flanged Shaft Retaining Bolt 10 Nm (7 ft lb) And A Further 90°
Front Cover Screws 25 Nm (18 ft lb)
Left Drive Axle Cover Plate To Housing 25 Nm (18 ft lb)
Oil Drain Plug 25 Nm (18 ft lb)
Oil Filler Plug 25 Nm (18 ft lb)
Right Park Brake Cable Bracket To Housing 25 Nm (18 ft lb)
Ring Gear Bolt 90 Nm (66 ft lb)

NOTE:
^ Use Only Genuine Ring Gear Bolts
^ Using A Diagonal Pattern Tighten Opposite Bolts

Selector Fork Shoulder bolt 35 Nm (26 ft lb)
Selector Fork Stop Shoulder bolt 35 Nm (26 ft lb)
Vacuum Element Retainer Bolts 25 Nm (18 ft lb)