Operation CHARM: Car repair manuals for everyone.

Coding Procedure

This function is used to code the radio for the following:
- Radio configuration
- Sound system
- Number of passive loudspeakers
- Country identification

NOTES:
- The ceding procedure is used to set the various radio configuration options.
- The coding table only gives the combinations that are available for the Audi A6.
- The term "antenna with remote power supply" refers to active antennas (e.g. rear window antennas) which are powered via the HF cable.
- The coding must always correspond to the equipment installed in the vehicle.

Coding Procedure

Indicated on display
Rapid data transfer HELP
Select function XX


- Press buttons -0- and -7- to select "Code Control Module" function 07

Indicated on display
Rapid data transfer Q
07 - Code Control Module


- Press -Q- button to confirm input. Indicated on display

Code Control Module Q
Input code number XXXXX 06812


- Input code number per coding table.

Coding: 00207 (example)
- Country identification: 0 = standard
- Sound coordination: 0 = standard
- Number of passive loudspeakers: 2 = 2 passive loud speakers in the front and 2 active speakers in the rear
- Sound system: 0 = standard (no BOSE sound system)
- Radio configuration: 7 = radio system with CD changer unit and secondary display

Indicated on display
Code Control Module Q
Input code number 00207 (0-32000)


Indicated on display (the control module identification and the coding that was input, 00207)
4B0035186 Radio D01 ->
Coding 00207 WSC 06812


- Press -> button to end coding.

Indicated on display
Rapid data transfer HELP
Select function XX


- Press buttons -0- and -6- to select "End Output" function 06.

Indicated on display
Rapid data transfer Q
06 - End Output


- Press -Q- button to confirm input.