Front Bumper

Front Bumper, Assembly Overview
1. Center air inlet grill
2. Screw (2x)
1 Nm (9 in. lb)
3. Bumper cover
Removing and installing. Service and Repair
4. Filler panel
5. Expanding clip (18x)
6. Impact absorber (2x)
Removing:
- Remove bumper. Service and Repair
- Remove A/C pressure switch.
- Remove nuts (or bolts) - 7 - and remove impact absorber.
Checking.
7. 23 Nm (17 ft lb)
2x
8. Bolt
12 Nm (9 ft lb)
9. Nut
10. Bracket
Different versions on left and right- sides
Adjusting.
11. Nut
12. Bumper carrier
Removing:
- Remove bumper. Service and Repair
- Unclip expanding clip - 5 -.
Adjusting Adjustments
13. Socket-head screw
65 Nm (48 ft lb)
14. Air inlet grill
15. License plate holder

Note: For additional information, please refer to Service and Repair Procedures for the Front Bumper. Service and Repair