Drive Belt: Service and Repair

Component Notes And Information

NOTE: During service procedures, refer to the component location illustration above and component notes below.

1 Bolt, tighten to: 35 Nm (26 ft lb)
2 Retaining Plate
3 Torsion Spring
4 Bolt, tighten to: 25 Nm (18 ft lb)
5 Flanged Nut, tighten to: 10 Nm (89 inch lb)
6 Damper
7 Bolt, tighten to: 25 Nm (18 ft lb)
8 Bolt, tighten to: 25 Nm (18 ft lb)
9 Generator Pulley
10 Bolt, tighten to: 25 Nm (18 ft lb)
11 Bolt, tighten to: 45 Nm (33 ft lb)
12 Hinged Mounting Bracket
13 Bolt, 8 x 28 mm, tighten to: 25 Nm (18 ft lb)
14 Bolt, 8 x 35 mm, tighten to: 25 Nm (18 ft lb)
15 Ribbed Belt
- Checking alignment, refer to Testing and Inspection. Testing and Inspection
16 Viscous Fan
- Removing and installing, refer to Replacement. Service and Repair