Rules For Cleanliness
CAUTION!
Whenever carrying out work on the fuel supply and fuel injection systems, carefully observe the following five rules of cleanliness.
1 Thoroughly clean fuel system line and hose connections and the surrounding area before disconnecting.
2 Place removed components on a clean surface and cover. Use plastic sheeting or paper. Do not use fluffy rags that could leave lint!
3 Carefully cover over or seal any components that have been opened if repairs are not carried out immediately.
4 Install only clean parts:
- Do not remove replacement parts from the packaging until immediately before they are to be installed
- Do not use parts that have been stored without packaging (e.g. in toolboxes, etc.)
5 When the fuel system is opened:
- Avoid working with compressed air whenever possible.
- Avoid moving the vehicle if possible.